NSW124V2: Dual 4 ohm 12" Subwoofer
  Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

NSW124V2: Dual 4 ohm 12" Subwoofer

$69.99
SKU: NSW124V2
Brand:
NVX
Weight:
11.00 LBS
Shipping:
Calculated at checkout
Qty
    nvx-nswv2-cutdi-082814.jpg

     

    nvx-site-spec-number-graphic-1-082814.jpg

    Rubber Subwoofer Trim Ring Gasket

     We’re all about the details here at NVX. That's why we include a rubber trim ring gasket with our N-Series subwoofers. The trim ring provides a tight seal against the sub and the box it is being mounted to, in order to prevent air pressure from passing between the two.

     

    nvx-site-spec-number-graphic-2-082814.jpg

    Surround & Suspension Technology

    We’re all about getting the most bang for our buck, a key reason why we chose to include high-roll foam surround technology in the N-Series woofers. The surround itself is constructed with high excursion foam, which keeps the inward movement of the surround perfectly symmetrical with the outward movement.

     

    nvx-site-spec-number-graphic-3-082814.jpg

    Custom Stamped Steel Basket

     Our custom basket offers several distinct advantages over traditional designs. We purposefully chose an especially open basket to improve airflow to reduce compression of the motor structure for both improved cone control as well as reduced back-wave interference.

     

    nvx-site-spec-number-graphic-4-082814.jpg

    2” High Temperature Aluminum Voice Coil

      The stout 2" high temperature voice coil is constructed from a copper wire wrapped around an aluminum former. This industry standard design is powerful enough to readily drive the cone with strict linear control, yet at the same time remains efficient enough for the compact, space saving magnet structure.

     

    nvx-site-spec-number-graphic-5-082814.jpg

    High-Energy Ferrite Magnet Motor Structure

    We chose a highly magnetized single stacked Ferrite magnet for the motor structure in the new N-Series. This magnet allows for greater power handling and voice-coil control during high excursion limits.

     

    nvx-site-spec-number-graphic-6-082814.jpg

    Ultra-Light Non-Pressed Paper Cone

    After testing scores of different cone materials, we decided on a custom blend of fine Ultra-Light Non Pressed Paper fibers. This stiff yet lightweight material produces spectacularly accurate bass with a rich, natural tonal quality prized by audiophiles. The smooth matte finish of the cone offers a sleek, modern accent to the interior of any car.

     

    nvx-site-spec-number-graphic-7-082814.jpg

    High-Excursion Strain-Relieved Tinsel Leads

    At NVX we understand that the components of a subwoofer must work in harmony to achieve sonic excellence, and that a subwoofer is only as reliable as its weakest link. There is perhaps no better example of our relentless attention to detail than the unique attachment method of our tinsel leads. Whereas the leads of most subwoofers are simply glued atop the spider, ours are glued at the basin of each fold in the spider with enough slack on top for unrestricted excursion.

     

    nvx-site-spec-number-graphic-8-082814.jpg

    NVX Embossed Rubber Magnet Boot

    We didn't even skimp on the magent boot for our N-Series subwoofer. Beside looking better than a bare magnet the rubber boot protects the magnet from chipping and possible corrosion that can affect magnets exposed to the elements.

     


     

    General Features:

    • 12" Dual 4-Ohm N-Series Version 2 Subwoofer
    • Power Handling:
      • RMS: 200-350 watts
    • Ultra-Light Non Pressed Paper Cone
    • Custom Blended Foam Surround
    • 2” High Temperature Aluminum Voice Coil
    • Single 52.5 oz. magnet motor structure with protective rubber boot
    • Nomex single spider
    • Stiched Tinsel Leads
    • Stamped steel basket for maximum rigidity
    • Top-mount depth: 5.01"
    • Frequency Response: 20 - 200Hz
    • Resonance Frequency (Fs): 28.50Hz
    • Sensitivity: 92 dB

    Download User Manual

    Subwoofer Series:
    N-Series
    Subwoofer Size:
    12"
    RMS Power Handling:
    200-350 watts
    Voice Coil(s):
    Dual
    Impedance (Per Voice Coil):
    4 ohms
    Voice Coil Diameter:
    2"
    Frequency Response:
    20 - 200 Hz
    Sensitivity:
    92 dB
    Xmax (millimeters):
    12 mm
    Subwoofer Design:
    Black
    Woofer Composition:
    Non-Pressed Paper
    Woofer Surround:
    Foam
    Magnet Structure:
    Single Stacked
    Subwoofer Grille:
    No
    Recommended Enclosure Type:
    Ported / Vented or Sealed
    Optimum Sealed Box Volume:
    1.25 cubic feet
    Optimum Ported Box Volume:
    1.75 cubic feet
    Top-Mount Depth:
    5.01"
    Cutout Diameter:
    10.83"
    Free-Air Resonance (Fs):
    28 Hz
    Equivalent Compliance (Vas):
    56.29 liters
    Total Speaker Q Value (Qts):
    0.734

    1 year standard warranty. For more details please visit our warranty page

    Sign up for our newsletter

    View Cart Go To Checkout