NVX NSW102V2 10" Dual 2-ohm NSW Series Car Subwoofer
  Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7

2 Pack of NSW102V2: Dual 2 ohm 10" Subwoofer (2 Subs)

$89.99
SKU: 2pk_nsw102v2_lc
Brand:
NVX
Weight:
16.00 LBS
Shipping:
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.


nvx-nswv2-cutdi-082814.jpg

 

nvx-site-spec-number-graphic-1-082814.jpg

Rubber Subwoofer Trim Ring Gasket

 We’re all about the details here at NVX. That's why we include a rubber trim ring gasket with our N-Series subwoofers. The trim ring provides a tight seal against the sub and the box it is being mounted to, in order to prevent air pressure from passing between the two.

 

nvx-site-spec-number-graphic-2-082814.jpg

Surround & Suspension Technology

We’re all about getting the most bang for our buck, a key reason why we chose to include high-roll foam surround technology in the N-Series woofers. The surround itself is constructed with high excursion foam, which keeps the inward movement of the surround perfectly symmetrical with the outward movement.

 

nvx-site-spec-number-graphic-3-082814.jpg

Custom Stamped Steel Basket

 Our custom basket offers several distinct advantages over traditional designs. We purposefully chose an especially open basket to improve airflow to reduce compression of the motor structure for both improved cone control as well as reduced back-wave interference.

 

nvx-site-spec-number-graphic-4-082814.jpg

2” High Temperature Aluminum Voice Coil

  The stout 2" high temperature voice coil is constructed from a copper wire wrapped around an aluminum former. This industry standard design is powerful enough to readily drive the cone with strict linear control, yet at the same time remains efficient enough for the compact, space saving magnet structure.

 

nvx-site-spec-number-graphic-5-082814.jpg

High-Energy Ferrite Magnet Motor Structure

We chose a highly magnetized single stacked Ferrite magnet for the motor structure in the new N-Series. This magnet allows for greater power handling and voice-coil control during high excursion limits.

 

nvx-site-spec-number-graphic-6-082814.jpg

Ultra-Light Non-Pressed Paper Cone

After testing scores of different cone materials, we decided on a custom blend of fine Ultra-Light Non Pressed Paper fibers. This stiff yet lightweight material produces spectacularly accurate bass with a rich, natural tonal quality prized by audiophiles. The smooth matte finish of the cone offers a sleek, modern accent to the interior of any car.

 

nvx-site-spec-number-graphic-7-082814.jpg

High-Excursion Strain-Relieved Tinsel Leads

At NVX we understand that the components of a subwoofer must work in harmony to achieve sonic excellence, and that a subwoofer is only as reliable as its weakest link. There is perhaps no better example of our relentless attention to detail than the unique attachment method of our tinsel leads. Whereas the leads of most subwoofers are simply glued atop the spider, ours are glued at the basin of each fold in the spider with enough slack on top for unrestricted excursion.

 

nvx-site-spec-number-graphic-8-082814.jpg

NVX Embossed Rubber Magnet Boot

We didn't even skimp on the magent boot for our N-Series subwoofer. Beside looking better than a bare magnet the rubber boot protects the magnet from chipping and possible corrosion that can affect magnets exposed to the elements.

 


 

General Features:

  • 10" Dual 2-Ohm N-Series Version 2 Subwoofer
  • Power Handling:
    • RMS: 200-350 watts
  • Ultra-Light Non Pressed Paper Cone
  • Custom Blended Foam Surround
  • 2” High Temperature Aluminum Voice Coil
  • Single 40oz. magnet motor structure with protective rubber boot
  • Nomex single spider
  • Stamped steel basket for maximum rigidity
  • Top-mount depth: 4.20"
  • Frequency Response: 20 - 200Hz
  • Resonance Frequency (Fs):  36.40Hz
  • Sensitivity: 89 dB
  • Download User Manual

Subwoofer Series:
N-Series
Subwoofer Size:
10"
RMS Power Handling:
200-350 watts
Voice Coil(s):
Dual
Impedance (Per Voice Coil):
2 ohms
Voice Coil Diameter:
2"
Frequency Response:
20 - 200 Hz
Sensitivity:
89 dB
Xmax (millimeters):
10.78 mm
Main Cone Color:
Black
Woofer Composition:
Non-Pressed Paper
Woofer Surround:
Foam
Magnet Structure:
Single Stacked
Subwoofer Grille:
No
Recommended Enclosure Type:
Ported / Vented, Sealed
Optimum Sealed Box Volume:
0.75 cubic feet
Optimum Ported Box Volume:
1.25 cubic feet
Top-Mount Depth:
4.20"
Cutout Diameter:
9.06"
Free-Air Resonance (Fs):
36.40 Hz
Equivalent Compliance (Vas):
17.32 liters
Total Speaker Q Value (Qts):
0.791

1 year standard warranty. For more details please visit our warranty page

Sign up for our newsletter

View Cart Go To Checkout