NVX MVPA4 Micro-V Series 400WRMS, Class D Compact 4-Channel Car Speaker Amplifier
  Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11

MVPA4: 4-Channel Compact Car Amplifier, 400W RMS

$179.99
SKU: MVPA4
Brand:
NVX
Weight:
2.13 LBS
Shipping:
Calculated at checkout
Qty

    NVX MVP Micro V Amplifiers

    The Micro-V MVP series amplifiers are our smallest amplifiers yet! If we're talking size that is! These amps are almost the size of a deck of cards, measuring in at just 4"W x 5-7/16"L x 1-9/16"H but still pumping out some serious juice! Our new MVP series amps use a cutting edge micro Class-D circuitry to keep the footprint small but the efficiency and output high. These amps are perfect for tight fit installations like in Smart Cars or motorcycles but are perfect for anyone who wants a bangin' system without taking up too much space.

    RMS Power Rating:

    • 4 ohms: 50 watts x 4 chan.
    • 2 ohms: 100 watts x 4 chan.
    • Variable low-pass filter (40-400 Hz)
    • Variable high-pass filter (40-400 Hz)
    • Input Sensitivity: 200mV-5V
    • 8 gauge power and ground wiring is required for installation.

    Download User Manual


    cea2006-50x50.jpg

    CEA-2006 Compliant: The CEA-2006 Standard is an official testing and measurement method for amplifiers established by the Consumer Electronics Association. In order to standardize the power ratings of mobile amplifiers, the CEA-2006 compliancy ratings where established to inform the customer that they are getting the wattage that they paid for. In defining this standard, CEA tests and rates the ”performance of amplifiers designed for use in mobile (vehicle) applications”. This statement found on the CEA website continues to define the types of amplifiers that they will test. It is applicable for single channel and multi channel amplifiers that rely on the vehicle’s primary electrical system and have a power output of greater than 5 watts. When an amplifier is tested, CEA uses the following method to ensure that the ratings are consistent.

    For RMS Power Output of Amplifiers:

        • Tested at 14.4 Volts
        • 4-ohm Impedance load
        • <1% THD (Total Harmonic Distortion)

    When looking for an amplifier, it is important to see if the manufacturer has received a CEA-2006 compliancy for the amplifier. If so, then the ratings can be trusted at the advertised wattage. If they are not CEA certified, it could mean one of two things. First, the manufacturer has not submitted the amp for testing and it may or may not perform as advertised. Second, the specifications of the amp are not considered to be CEA-2006 compliant.

    This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

     

    Amplifier Series:
    MVP
    Amplifier Class:
    D
    Number of Channels:
    4
    Total RMS Power Output:
    400 watts
    Maximum Input Gauge Size:
    8 AWG
    Minimum Impedance Unbridged:
    2 ohms
    Minimum Impedance Bridged:
    4 ohms
    THD at Rated RMS Power:
    <0.07%
    Speaker Level Inputs:
    Yes
    Preamp Outputs:
    No
    Built-in Crossover:
    Low-pass (LP), High-pass (HP)
    High-Pass Crossover Frequency:
    40 - 400 Hz
    Low-Pass Crossover Frequency:
    40 - 400 Hz
    Signal-to-Noise Ratio:
    101 dB
    Bass/Gain Remote:
    No
    Fan Cooled:
    No
    Fuse Rating:
    30A x 1
    CEA-2006 Compliant:
    Yes
    Strappable:
    No
    RMS Power @ 4 ohms:
    50 watts x 4 channels
    RMS Power @ 2 ohms:
    100 watts x 4 channels
    Bridged RMS Power:
    175 watts x 2 channels

    1 year standard warranty. For more details please visit our warranty page

    Sign up for our newsletter

    View Cart Go To Checkout